How to Clean Air Conditioner?

Your air conditioner is an integral element that creates your home into an oasis of peace and tranquility. As time passes, you may find your unit striving harder to attain the same amount of cooling that it did in the past. If you also have an heating, ventilation and cooling system (HVAC) and you have a heating system, it will become less effective as time passes.

Cleansing your AC is an essential component of maintenance that ensures that your system is healthier over the course of. This means fewer costly repairs and a lower cost for energy. With a bit of time, patience and a little precision, you can get your air conditioner cleaned to improve its performance.

Tips for Cleaning Your Air Conditioner

Before we discuss how to give your air conditioner unit a cleaning, here are some tips you must remember:

• The process can take time. Make sure you have a minimum of half a day to finish the task correctly.
• The cleaning process require precise movement and dexterity.
• You might require special equipment to finish the cleaning.

Although you could do this type of maintenance on your own however, the endurance as well as fine motor abilities needed for this task make it task best left to professionals. If your AC unit is extremely dirty or exhibits excessive signs of wear, it’s recommended to get the help from a specialist.

our services include:

Aircon Repair kuala Lumpur, Aircon Repair Shah Alam, Aircon Repair Petaling Jaya, Aircon Repair Klang, Aircon Repair Ampang, Aircon Repair Cyberjaya, Aircon Repair Putrajaya, Aircon Repair Subang Jaya, Aircon Repair Kajang, Aircon Repair Puchong

Our maintenance related services include:

Aircond Maintenance Cheras, Aircond Maintenance kuala Lumpur, Aircond Maintenance Shah Alam, Aircond Maintenance Petaling Jaya, Aircond Maintenance Klang, Aircond Maintenance Ampang, Aircond Maintenance Cyberjaya, Aircond Maintenance Putrajaya, Aircond Maintenance Subang Jaya, Aircond Maintenance Kajang, Aircond Maintenance Puchong

The Difference Between Condenser Coils and Evaporator Coils

Before you get started taking care of cleaning the AC unit, you need to be aware of how it works. Air conditioners come with two components: an indoor and an outdoor one, and each has a specific kind of coil that you have to clean.

There are evaporator coils inside the interior within the device. These coils are generally comprised of copper which is a heat conductor that can be easily absorbed and also contains coolant. They absorb heat when warm air flows through them, and then the refrigerant is evaporated to gas.

In the next step, the refrigerant moves warm air to an outside unit, and then goes through the compressor and into condenser coil. This is when the compressor brings the refrigerant back to the state of liquid. The condenser coil releases heat into the air by using an exhaust air fan.

To cleanse your AC unit it is necessary to clean both the outdoor and indoor parts of the unit.

If you’re scared by the difficulty that is cleaning the air conditioner or you’re worried that it might require more maintenance, our Aircon Repair experts are waiting to help you clean as well as diagnose and repair any issues you may encounter. Contact us now to arrange appointment with an AC specialist in Malaysia.

How to Clean Your AC Unit Inside

It’s your choice whether you’d prefer to start with the indoor or outdoor part of the device. We’ll start with instructions for the inside part.

1. Turn Off the Power of the Air Conditioner

Air conditioners are full of moving parts. since safety is important it is recommended to shut off power to the breakers box. That means you won’t be able to use any lighting, which means this is a daytime project. If your indoor unit is dark, like an attic, you’ll need to create sufficient lighting.

2. Open Up the AC Unit

The blower unit has access into the coil of evaporation. Depending on the model you may need to take off the foil duct tape. There are usually some screws or bolts that hold the door in place.

3. Clean the Air Conditioner Evaporator Coils

If you own a soft brush, make use of it to get rid of dust from the coil. The dust will be made up of the particles that make up the interior in your house. It includes skin cells, and sometimes pollen. If you’re susceptible for allergies, then you might prefer wearing a mask.

The most effective cleaning method is a non-rinse coil cleaner you can buy from the local home improvement retailer. The spray is foamy and drips down the drain pan of the unit collecting dust and dirt along with it. Spray the foam in an even manner and make sure you get it into every tiny space you’re unable to reach manually.

The ideal moment to perform this procedure is during a warm day and, when you switch off the unit and turn it off, the AC condensation will wash away the coils.

4. Clean the AC Drain Pan

After your coil cleaner is finished its work, scrub your drain tray. Hot water and soap are the best starting point, and bleach is helpful in sanitizing. Make a mix of 50/50 that includes bleach as well as water. Pour the mixture into the drain to ensure that it is clear. If you’re looking for a more long-term solution to prevent your drains from becoming awash with the algae that you’ll need to buy AC Drain Pan tablets from many hardware and home improvement stores.

5. Clear the Air Conditioner Drain If It Is Plugged

If the bleach solution is washes easily down the drain you’re not required to do this. If the water is slow it could mean that your drain is blocked. If you don’t maintain it regularly there is a chance for algae and mold to accumulate in your drain. It’s typically the case with a PVC pipe about 1 inch in width, which means it’s not a big amount of buildup to block the drain.

Your drain might end in the exterior, typically near the unit that condenses. If not, it could drain into a sink or the floor of your basement. If the unit is located situated in the attic, it might drain through one of the walls on your exterior. Follow the drain until it comes to an end and bring dry or wet vacuums with you. If you’re worried about the possibility of contaminating the filter, you can take it out of the vacuum.

Make sure you take the vacuum hose and attach it to the top to drain the tube. You can stop the leakage of air by putting an apron over the gap. If you’d like the strongest seal, use duct tape to seal the drain and the hose to each other. Start the vacuum and allow it to run for two to three minutes to remove any accumulation that may have accumulated.

6. Close the AC Access Panel

Attach the access panel with the same screws that you pulled out at earlier stages of this process. If you’ve got HVAC foil make use of it to secure the bottom and top part of the panel. Make sure you don’t cover the label from the manufacturer, as the technician might require it to complete maintenance or repair on the device.

That’s all you have to do for a routine cleaning, but you might face challenges that you aren’t able to tackle by yourself. If you own A-frame coils that evaporate, you might encounter parts that aren’t accessible due to the coils being enclosed at both ends. If you haven’t washed the A-frame coils in a while chances are you’ll require assistance from professionals to make sure they are completely clean.

How to Clean Your AC Unit Outside

Cleaning the exterior unit and condenser coils takes more work than inside of the portion. Because it’s always exposed to the elements, this portion of the system will become extremely going dirty. It will also require more special equipment to keep it spotless. Follow these guidelines to keep your outdoor unit working at its peak.

1. Disconnect and Remove AC Grille

Make sure that you turn off the power. You can cut off the electricity using an outdoor switch box prior to beginning.

Remove the screws made of sheet metal that are on above the fan unit. After you’ve removed them, raise the grille and fan unit. The majority of units have enough space in the wires to put the top of the unit down and then place to the wall, without needing to cut the wires.

2. Remove Debris in Air Conditioner

According to the model it will have a different amount of debris at your air conditioning’s bottom. The entry-level models do not usually contain guards that block debris from getting through to the front of the unit. This means that you might be able to find seeds, leaves and even tiny branches inside the bottom of the pan.

You can take the dirt out with your hands or utilize a wet or dry vacuum to clean the entire mess out.

3. Clean the AC Coils and Fins

Cleaning AC condenser units is not difficult. It is necessary to use an effective cleaner for coils that you can purchase in any home improvement retailer. It is important to note that cleaner for condenser coils is highly acidic and could cause burns. The fumes can be dangerous and that’s why you should not apply this cleaner to the coils in your home.

Mix or dilute the cleaning solution as per the directions and then add it to the pump sprayer. Spray it on the coils. It will begin to foam in just a few minutes. Then, you can rinse it off with a water hose.

Don’t use an air pressure washer to complete this job. The fins are fragile, and pressure can cause them to break.

4. Straighten the Air Conditioner’s Fins

The airflow is reduced by bent fins and, therefore, this step is vital to ensuring effectiveness. The best method to do this is to buy fin tools. The kits are inexpensive and have teeth that let you make a specific number of fins for each inch. Make sure that you’re using the right amount of fins for each inch the unit you’re using. All you need to do is gently comb the fins back in the correct position.

5. Clean Around the AC Unit

Install the new fan cage and secure the fan cage to your unit using the screws that you removed prior to. Check that the surrounding area is free of obstructions at least 2 feet in each direction to ensure optimal airflow.

6. Level the Air Conditioning Unit

Dirt can settle beneath your unit , which can cause it to tip over. If a condenser unit has been not level for long enough, it could fail before it is time and cause expensive repairs. If you discover that the condenser isn’t at a proper level, use shims or shims make it level to where it should be.

How to Clean Your Air Conditioning Filter

If you’re looking for a way to clean windows on an AC system, the first priority is cleaning the filter. AC units that are centrally located typically come with filters designed to be replaced, not cleaned. If you plan cleaning the filters of an enormous model, it is best to look through the instruction manual to determine if cleansing the filters is an alternative. The removal of the filter is different depending on the model, however the steps needed to clean filters are generally identical.

1. Vacuum the AC Filter

To maintain your filter, a regular vacuum is all you have to do. Utilize an attachment that is not brushes, since they could harm the filter. Use the vacuum nozzle to run it across all along the width of your filter. It is likely that you will observe a lot of dust being removed. If you are a pet owner, you might need to run the filter several times to eliminate the most hair you can. Do not over-press the filter while you vacuum, or you could result in tearing or destroying it.

2. Soak the AC Filter

The bathtub can be filled with water or another container large enough to hold warm water at room temperature. Add a tiny amount of liquid detergent that you normally use and mix it thoroughly, to ensure that the water foams up. Place the filter inside the container, and ensure that it’s completely submerged. The filter should be moved between two places, until it’s completely covered by the soapy solution. Then, allow it to rest for 10 to 15 minutes.

Avoid using brushes or other tools with abrasive materials on the filter, since they can cause damage. The use of a hose is effective method to get rid of dirt and other debris. You can hose off just one at a time until the water runs clear.

3. Spray the AC Filter

Mix together a one-to-one mixture of water and vinegar, and pour it into the spray bottle. Spray the entire surface of the filter and wait for 10 minutes to kill the bacteria. Rinse the filter with running water prior to continuing.

4. Dry the AC Filter

The AC filters must be air dry. It can take several hours before they are totally dry. To help in this process, put newspapers in the ground under the filter. It is recommended to lean the filter towards the wall, on the top of the newspaper. When at least three hours have gone by it is possible to reinstall the filter inside the cooling unit.

Keeping Your AC Running Strong

Clean air conditioners are an effective air conditioner however, cleaning your AC unit by yourself isn’t always feasible. If you don’t have an industrial vacuum cleaner or don’t wish to deal with chemical-based cleaners or think of spending hours the fins of your AC back in place, it’s the time to get experts.

In AirCond Master. We conduct complete cleaning in order to maintain your system. Our technicians do not just clean the inside of your AC unit, they follow a complete checklist to make sure your AC is running smoothly.

When the tune-up is completed after the tune-up, the technician can give you a detailed document that outlines the work performed and the need for adjustments or repairs. Aircon Repair, Aircon Service, Aircon Maintenance, Aircon Installation. will keep your home operating as an engine that is well-oiled. If you require repairs for minor issues or require urgent assistance We are the best choice for fast and professional service within Mayalsia.

If you are looking for dependable support in your area Contact AirCond Master. Fill out the contact us form or phone our number at 6011-6214-8196, or chat with us on the internet.